Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Thornton Homeowners
A gate that won’t open leaves your driveway blocked and your property exposed, and it’s rarely something a general handyman can sort out. Gate repair in Thornton means finding the actual fault – a tired operator, a control board that’s given up, a sensor knocked out of line, or a hinge that’s torn loose – and fixing it properly. Our technicians have up to 15 years of experience and work on both manual and electric systems, so we’re not guessing at your setup. Same-day service is available, we quote and agree the price before any work starts, and estimates are free. Call (866) 389-4610. We answer 24/7, with fast dispatch from 7am to 7pm.
Driveway Gate Repair
Driveway Gate Repair covers the gate that guards your main vehicle entrance, whether it swings or slides, and whether it’s opened by hand or by a motor. You need it when the gate drags, stops halfway, opens on its own, or won’t budge at all – problems that tend to show up on older operators and on gates that see heavy daily use. We diagnose the fault first, then repair the operator, control board, sensors, wiring or mechanical parts as needed, and we’re experienced with Ghost Controls and Mighty Mule residential systems as well as heavier commercial operators. Most driveway repairs in Thornton run somewhere in the range of $150 to $450 depending on the fault and parts, with the written estimate setting the final figure.
What a Driveway Diagnosis Covers
We check travel limits, motor current draw, the control board, sensor alignment and the physical gate itself. That tells us whether the problem is electrical, mechanical or both, so we don’t replace a part that was never the issue.
When a Repair Beats a Replacement
If the gate structure is sound and the operator is a model we can still source parts for, repair usually makes more sense than a new system. We’ll tell you plainly when that’s the case, and when it isn’t.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Welding
Gate Welding is the repair of cracked frames, broken hinge mounts, failed welds at post brackets and split joints on metal gates. You need it after a gate takes a hit from a vehicle, when a hinge has pulled free of the frame, or when you can see rust pushing a weld apart. We reweld the affected joints, reinforce the repair so it holds under the gate’s own weight, and check the gate is hanging true afterwards – a weld that fixes the crack but leaves the gate out of square will just fail again. Welding repairs in Thornton typically run $150 to $400 depending on how many joints are involved and whether the gate needs to come off its hinges. The written estimate covers the scope before we start.
Structural Versus Cosmetic Welds
Load-bearing welds at hinges and posts need proper penetration and reinforcement. Small cosmetic cracks can be handled more simply. We treat the two differently because they carry different weight.
Prepping a Metal Gate for Repair
Rust and old paint have to come off before a weld will bond properly. We clean the joint area first, then finish it so moisture can’t get back in at the same spot.
Commercial Gate Repair
Commercial Gate Repair covers the higher-cycle operators and access systems that HOAs, apartment communities, storage yards and business entrances rely on. You need it when an entry gate is sticking open, dropping calls from the keypad, failing to close reliably, or cycling far more often than a residential unit was ever built for. We’re experienced with DoorKing and Elite systems alongside FAAC and BFT commercial operators, and we work on motors, control boards, sensors and wiring as well as the gate structure itself. Commercial repairs in Thornton usually land between $200 and $600 or more, depending on the operator and the fault. We quote before we start, and the written estimate is what you pay.
Access Control and Keypad Faults
Entry codes that stop working, intercoms that cut out and loop detectors that miss a vehicle are common commercial faults. They’re usually a wiring or control board issue rather than the gate itself.
Keeping an Entry Gate in Service
A high-cycle gate that’s failing should be repaired rather than nursed along, because a stuck-open entry gate is both a security and a liability problem. We prioritize the faults that affect access.
Iron Gate Repair
Iron Gate Repair deals with the heavier cast and solid iron gates that carry real weight on their hinges and posts. You need it when the gate has started to sag, when a hinge has worn through, or when the post footing has shifted enough that the gate no longer latches cleanly. Iron gates don’t flex the way lighter metal does, so a bent frame or a failed hinge needs proper correction rather than a quick patch. We handle hinge replacement, frame straightening, latch and strike repairs, and post bracket work, and we check the gate swings free before we call it done. Iron gate repairs in Thornton usually run $180 to $450 depending on the weight of the gate and the parts involved.
Sagging and Hinge Wear
Heavy iron gates wear their hinges faster than lighter ones. A gate that’s dropped at the latch end is usually telling you the top hinge has worn or the post bracket has moved.
Post and Footing Issues
When the post itself has shifted, repairing the gate alone won’t fix the alignment. We check the footing and tell you if the post needs attention before the gate will hang right.
Sliding Gate Repair
Sliding Gate Repair is the work on gates that run along a track or cantilever instead of swinging open. You need it when the gate jumps the track, drags on the ground, stops partway through its travel, or when the rollers and guides have worn enough that it no longer runs straight. Sliding gates put their load on the track and rollers rather than the hinges, so a rough-running gate is often a roller, guide or track problem before it’s an operator problem. We repair tracks, rollers, guides, operators and safety edges, and we check the gate runs true through its full travel. Sliding gate repairs in Thornton typically run $150 to $450 depending on the hardware and whether the operator is involved.
Track and Roller Problems
A gate that’s come off its track or is grinding along the ground is usually a worn roller or a misaligned guide. Left alone, it wears the track and eventually the operator.
Why a Sliding Gate Stops Mid-Travel
Obstruction sensors, limit switches and control board faults all cause a sliding gate to reverse or stop. We test each one rather than swapping parts until something works.
Wrought Iron Gate Repair
Wrought Iron Gate Repair covers the decorative ironwork gates common on older properties and on entrances where appearance matters as much as function. You need it when the gate has rusted through at the joints, when a picket or scroll has come loose, or when the frame has twisted enough that the gate scrapes its post. The tricky part with wrought iron is that the decorative elements carry some of the structure, so a repair has to respect both the look and the strength. We reweld joints, reattach loose ironwork, correct twists and treat rust before it spreads. Wrought iron repairs in Thornton generally run $180 to $450 depending on the extent of the corrosion and the amount of ironwork involved.
Rust and Corrosion at the Joints
Water sits in the joints of wrought iron and rusts them from the inside. We clean the joint back to sound metal before welding and finish it so it stays protected.
Preserving the Original Ironwork
Where the decorative detail is worth keeping, we match the repair to the existing work rather than cutting it out. That keeps the gate looking like the gate you already have.
Metal Gate Repair
Metal Gate Repair covers steel and aluminum gates of all kinds – tubular frames, mesh infill, sheet steel and pressed panels. You need it when a frame has bent, a panel has been pushed in, a hinge has torn out of thin-walled tube, or a gate has rusted at the base where water pools. Aluminum and thin steel behave differently under repair than heavy iron, and welding thin tube without blowing through it takes a different approach. We straighten frames, repair hinges, fix base rust, and rehang gates that have dropped, and we check the whole gate for further weak points while we’re there. Metal gate repairs in Thornton typically run $150 to $400 depending on the material and the damage.
Thin-Walled Frame Repairs
Tubular gates need careful heat control so the weld holds without burning through the wall. We reinforce the joint so the hinge doesn’t tear out again.
Base Rust on Steel Gates
Ground level is where steel gates rust first. Cutting out the rot and replacing the section is the only repair that lasts, and it’s worth doing before the frame weakens.
Wood Gate Repair
Wood Gate Repair covers timber gates on driveways, side entrances and garden boundaries – the gates most exposed to Thornton’s dry summers and hard freezes. You need it when a stile has split, a hinge has pulled out of the wood, the gate has sagged and is dragging, or the frame has started to rot at the base. Wood moves with the seasons, so a gate that binds in one month can swing free the next; the fix is usually a brace, a rehung hinge, or replacing a rotted section rather than forcing the gate back to square. We repair frames, hinges, braces and bases, and we refit the gate so it hangs and latches cleanly. Wood gate repairs in Thornton usually run $150 to $350 depending on the timber and the extent of the repair.
Split Stiles and Pulled Hinges
A hinge that’s worked loose has usually split the wood around it. We reinforce the stile rather than just driving longer screws into failed timber.
Sagging and Bracing
A diagonal brace is what keeps a timber gate square. When the existing brace has failed or the gate was built without one, adding proper bracing stops the sag from returning.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We work on your brand, and we’ve built up real familiarity with the systems homeowners and property managers actually have installed. We service Ghost Controls equipment and know how their residential operators behave when the battery backup or the limit setting drifts. We service Mighty Mule operators and know where the control board and the sensor wiring tend to fail first. We service DoorKing systems and understand the access control side that commercial and HOA entries depend on. We service Elite equipment as well.
We’re independent, which means we repair the brand you already own rather than steering you toward a replacement you don’t need. Whether you have a Ghost Controls, Mighty Mule, DoorKing, Elite or any other make, we can help. If you’d rather start with a broader look at what we cover, our gate repair Thornton page lays out the full picture, and you can read more about gate repair as a service before you call.
Signs You Need a Pro Right Now
- The gate stops or reverses on its own. That’s usually a sensor, a limit switch or a control board fault, and it can leave the gate stuck open or refusing to close. Worth getting looked at before it fails completely.
- The operator runs but the gate doesn’t move. A motor that turns without moving the gate points to a stripped gear, a broken arm or a drive fault. It won’t fix itself and running it can cause more damage.
- The gate drags, scrapes or has dropped at one end. Hinge wear, a failed roller or a shifted post is the usual cause. Left alone, the gate works against the operator and shortens its life.
- A hinge, weld or bracket has cracked or pulled free. That’s a structural failure, and a heavy gate panel that’s no longer held properly is a crush risk. Stop using it by hand until it’s repaired.
- The keypad, remote or entry code has stopped working. Could be the receiver, the wiring, the battery in the remote or the control board. A quick diagnostic tells you which.
Our Process, Step by Step
- 1
You call and describe the fault. We ask what the gate is doing – or not doing – so we arrive with the right starting point and don’t waste your time on the wrong diagnosis.
- 2
We come out and diagnose. We test the operator, the control board, the sensors, the wiring and the gate’s mechanical movement. On electric gates we check current draw and travel limits to see whether the fault is electrical or mechanical.
- 3
We give you a written estimate before any work. The scope and the price are agreed up front. Nothing starts until you’re clear on what’s being done and what it costs.
- 4
We carry out the repair. Parts are sourced for the operator we’ve identified, and we test the gate through its full cycle once the repair is in place – including the safety edges and sensors.
- 5
We walk you through what was done. You get a clear account of the fault and the fix, so you know what to watch for. If the gate also needs gate repair work on a second gate on the property, we can quote that on the same visit.
How Much Does Gate Repair Cost in Thornton?
Most gate repair in Thornton falls somewhere between $150 and $450, with the final figure set by the written estimate. A typical driveway gate repair runs $150 to $450 depending on the fault and the parts needed. A sliding gate repair typically runs $150 to $450, and iron or wrought iron work usually lands between $180 and $450 because of the weight and the metalwork involved. Commercial and high-cycle operators run higher, often $200 to $600 or more, since the systems are heavier and the access control side adds complexity.
What moves the price is the fault itself, the availability of parts for your operator, whether the gate needs to come off its hinges, and how much of the structure has been affected. Rust and corrosion push costs up because the damaged metal has to be cut back to sound material before a repair will hold.
To avoid overpaying, get a clear diagnosis before agreeing to parts. A technician who swaps an operator without testing the sensors or control board may be charging you for the wrong fix. Ask what’s being replaced and why.
A free estimate from us includes the on-site diagnosis, a clear explanation of the fault, and a written price for the repair. You’ll know what you’re paying before we pick up a tool. For a second property or a neighboring town, our gate repair coverage works the same way. Call (866) 389-4610 for an exact quote – estimates are free.
Our Service Area Near Thornton
We cover Thornton and the surrounding north-metro area, including Westminster, Denver, Arvada, Lakewood, Aurora, Centennial and Ken Caryl, plus Frederick and Fort Lupton further out. Response times vary by location and by how the day is running, so the best way to get a firm time is to call with your address. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday.
Serving Thornton, CO – Our Local Coverage Area
We serve Thornton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Thornton
Gate repair is the diagnosis and fixing of anything stopping a gate working properly – the operator, control board, sensors, wiring, hinges, welds, track, rollers or the gate structure itself. It covers both manual gates and electric or automated systems, residential and commercial. We work on the full range, from a driveway gate that won’t latch to a commercial entry operator dropping keypad calls. Call (866) 389-4610 for an exact quote – estimates are free.
Most repairs are completed in a single visit, often within an hour or two once the fault is identified. Simple fixes like a sensor realignment or a hinge repair are quick, while a weld repair or operator replacement takes longer. The written estimate tells you the scope before we begin, so you know what to expect. Call (866) 389-4610 to book a time.
Most repairs run between $150 and $450, with commercial and high-cycle systems often higher. The price depends on the fault, the parts, and whether the gate structure needs work alongside the operator. You get a written estimate before any work starts, and that estimate sets the final price. Call (866) 389-4610 for a free estimate.
Yes, we service Ghost Controls and Mighty Mule operators, along with DoorKing and Elite systems and other major brands. We’re experienced with both residential-grade operators and the heavier commercial units used on HOAs and business entrances. That range means we can diagnose your system rather than sending you elsewhere. Call (866) 389-4610 to describe the fault.
Same-day service is often available in Thornton, so call and we’ll tell you what we can do. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Our repairs are covered by a satisfaction guarantee, so if something isn’t right we’ll come back and put it right. The written estimate sets out what’s included in the job. It’s a straightforward arrangement and we’ll explain it before we start. Call (866) 389-4610 with any questions.
Clear access to both sides of the gate and to the operator housing if you can, and make sure someone is on site to open up and answer questions. If you have the operator manual or the model details, have them to hand – it speeds up diagnosis. Jot down what the gate is doing and when it started, since that often points to the fault. Call (866) 389-4610 to confirm the visit details.
Schedule Your Gate Repair Service in Thornton Today
A gate that won’t open or close properly is worth fixing before it gets worse. We’re gate specialists, from the motor to the keypad, and we’ll diagnose the fault, give you a written price and get you back up and running. Call (866) 389-4610 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gate Repair Thornton.