Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Lakewood
If your electric gate has stopped opening, is dragging on the track, or keeps tripping the operator, you’re in the right place. We handle electric gate repair across Lakewood, from older ranch properties with legacy wooden gates to HOA entries in gated communities that need parts matched to an approved palette. Our technicians have up to 15 years of experience, we work on the major operator brands by name, and we quote the price and agree it with you before any work starts. Call (866) 389-4610. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Lakewood Homeowners Call Gate Repair Thornton for Electric Gate Repair
Most of Lakewood’s gated properties sit inside HOA communities or on mid-century lots where the gate was installed long ago and the operator has been patched together more than once. We’re a gate specialist, not a general fence or garage-door outfit fitting gates on the side, so the technician who shows up has already seen the failure you’re describing on another Lakewood gate. That focus matters when the fix has to satisfy both the mechanism and the community’s architectural rules.
We work on your brand. That includes LiftMaster, DoorKing, Elite and Mighty Mule systems across residential driveways and shared HOA and commercial entries, and we diagnose control boards, sensors, keypads and wiring rather than guessing at the motor. From the motor to the keypad, the whole automation is in scope.
Our team is state-licensed and insured, and we give free estimates with the price set per job by a written quote. If your gate is down, call (866) 389-4610. Same-day repair is often possible, and we’ll tell you honestly whether the job needs a scheduled visit with parts ordered to match your community’s approved finish.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Electric Gate Motor in Lakewood
An Electric Gate Motor in Lakewood usually fails for one of two reasons: the motor itself has worn out, or something else is fighting it. A typical replacement or motor repair in Lakewood runs $450 – $1,200 depending on the operator, and we quote it in writing before we start. Front Range freeze-thaw cycles are hard on outdoor operators, and a gate that has to be pushed by hand is often a motor straining against a hinge post that has heaved in clay soil. We diagnose the cause first, because replacing a motor on a misaligned gate just wears the new one out.
Motor and Operator Diagnostics
We test the operator under load, check the control board and limit settings, and confirm the gate moves freely on its own before blaming the motor. On HOA entries we also look at how the operator handles shared traffic, since a high-cycle DoorKing or FAAC unit under constant resident use fails differently than a residential driveway gate.
When a Motor Rebuild Makes Sense
Some operators can be repaired at the board or gearbox level rather than replaced outright. We weigh repair against replacement and give you the honest numbers, then let you decide. If a straight swap is cheaper and more reliable, we’ll say so.
Gate Access Control in Lakewood
Gate Access Control in Lakewood is where shared HOA entries and private driveways run into trouble that has nothing to do with the motor. A keypad that won’t accept codes, a remote that stopped working after a power outage, or a sensor that triggers phantom openings all fall here, and typical repair runs $150 – $650 depending on the system. We service the keypads, remotes, safety sensors and control boards that make up the entry side of the gate, and we coordinate with property managers so residents aren’t locked out longer than necessary.
Keypads, Remotes and Shared Entry
A keypad failure after an outage is often a control board or power issue rather than a dead keypad, so we trace the circuit before swapping parts. On HOA and commercial entries we set up resident access so the whole community keeps moving while we work.
Safety Sensors and Entrapment Protection
Automatic gates need working entrapment protection, and a sensor that’s out of alignment or fogged up can stop the gate entirely. We check and realign the sensors and confirm the reverse function works. If yours doesn’t, that’s a safety issue we take seriously and won’t leave you with a gate that can close on someone.
Trusted Brands We Service in Lakewood
We work on your brand, and we mean it by name. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule operators are all in our wheelhouse, from residential-grade Ghost Controls and Mighty Mule units on private driveways to commercial DoorKing and FAAC systems on shared HOA entries. That breadth means you won’t get sent elsewhere because your brand is unfamiliar. We don’t claim factory authorization and we don’t stock parts locally, but we know these systems well enough to diagnose them accurately and turn most repairs around fast.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Lakewood Homes
- Heaving hinge posts in old concrete footings. Lakewood’s clay soil and freeze-thaw cycles push original 1960s footings out of plumb, so a gate sags and the operator can’t line up. Especially near the 80225/80226 line, we check plumb before quoting a simple hinge repair, because it often turns into a post reset.
- UV damage and winter splitting on wooden panels. The Front Range sun and hard winters split solid and picket panels, and a warped panel binds the rack and pinion on slide gates. That triggers repeated operator faults that look electrical but start with the wood.
- Drifting limit switches after post movement. When the hinge post shifts, the operator’s limit switch drifts and the gate stops responding to commands. We re-level the footing and recalibrate rather than just resetting the limits to mask it.
- HOA finish and hardware mismatches. Many Lakewood communities restrict replacement hardware and finish, so the wrong part can void architectural approval. We source or fabricate components to match your approved palette so the repair passes review.
Pricing for Electric Gate Repair in Lakewood, CO
Electric gate repair in Lakewood runs from about $150 for a sensor or keypad fix up to $1,200 for motor and operator work, with the written estimate setting the final price. A typical motor or operator repair sits around $450 – $1,200; access control and sensor work, including keypads, remotes and safety sensors, usually lands in the $150 – $650 range. What moves the number is whether the failure is electrical or mechanical, whether the post needs resetting, and whether HOA standards require custom-fabricated or color-matched parts. We give a free on-site estimate and agree the price with you before any work begins, so there’s no surprise on the invoice. Call (866) 389-4610 for an exact quote.
We Also Serve Cities Near Lakewood
We also handle electric gate repair in the communities around Lakewood, including Ken Caryl, Arvada, Denver and Westminster. If you’re managing a gated community just over the line, our electric gate repair team can coordinate the visit and keep the entry work on schedule. Call (866) 389-4610 for a free estimate.
Serving Lakewood, CO – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Lakewood
Yes. We repair the mechanism and match the existing finish so the gate stays within your community’s approved palette. Many Lakewood architectural review boards require exact color and stain matches, so we source or fabricate components to match rather than swapping in whatever is on hand. Call (866) 389-4610 and tell us your community’s requirements up front.
It often is. Lakewood’s clay soil and freeze-thaw cycles heave original concrete footings, which pulls the hinge post out of plumb and makes the operator work harder until it trips. A repeat trip usually means the post alignment wasn’t corrected before the operator was recalibrated. Call (866) 389-4610 for a plumb check.
Automatic gates need working entrapment protection, and your specific requirement depends on your gate and municipality, so check with the city before relying on any setup. The practical test is simple: the gate should reverse or stop when the sensor is obstructed. We check and realign sensors and confirm the reverse function as part of any repair. Call (866) 389-4610.
Yes. We repair rack and pinion wear on LiftMaster slide gates, and winter ice binding is a common cause. We check whether the wear is just the rack or whether a warped panel is causing the binding in the first place, then quote the fix in writing. Call (866) 389-4610 for a free estimate.
Often, yes. A keypad that dies after an outage is frequently a control board or power issue rather than the keypad itself, so we trace the circuit first. Most access control fixes run $150 – $650. Call (866) 389-4610 and we’ll diagnose it before quoting.
Ready to get your gate back up and running? Call (866) 389-4610 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Whether it’s a private drive in Lakewood or a shared HOA entry that needs to match architectural standards, we’ll diagnose it, quote it in writing, and agree the price before we start. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Written by the team at Gate Repair Thornton.