Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Arvada, CO
If you’re planning a new gate, gate installation in Arvada starts with a free on-site measure, a conversation about how the gate will be used, and a written price before anything is ordered. Arvada is a tricky place for gates. The city runs from 1950s brick ranches near Olde Town to the newer foothills subdivisions out around Candelas and Leyden Rock, and the ground under both moves with every freeze-thaw cycle. We’re gate specialists, not generalists, so we work on the gate itself and nothing else. Call (866) 389-4610 to set up a free estimate.
Why Arvada Homes Are Different
Arvada’s gate work splits into two worlds a few miles apart. In the ZIP codes around Olde Town, the mature lots are full of 1950s to 1970s wrought-iron and chain-link gates that have rusted, sagged and frozen in place. Out on the western edge, subdivisions like Candelas, Whisper Creek and Leyden Rock are governed by HOAs that mandate decorative metal and composite gates, with wind-rated hardware and an architectural-review committee that will reject a mismatched style outright.
Then there’s the ground. Arvada sits on expansive clay soils, and the Front Range freeze-thaw cycle – winter days that swing from the 60s down to single digits – heaves posts out of plumb and racks gates out of square. The gate usually isn’t the problem; the footing is. Intense high-altitude UV and dry air dry out wood until it swells and splits, and metal hinges seize. Seasonal adjustment and lubrication is a routine annual need here, not a one-time fix.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Arvada Services
Two jobs account for most of the calls we get from Arvada homeowners and property managers, and both are handled by technicians who concentrate on gates full time.
Gate Repair in Arvada
Repair work in Arvada often has less to do with the gate leaf than with what’s holding it up. When a gate drags, latches crooked or won’t swing closed, the cause is frequently a post that has heaved in the clay. We check the hinges, the frame and the footing before we touch anything, and we re-set posts in deeper, gravel-drained footings rather than just tightening hardware that will loosen again by spring. Older wrought-iron and chain-link gates near Olde Town get the same careful look at rust and frozen pivots. Our technicians have up to 15 years of experience, and our Gate Repair in Arvada page covers the common failures in more detail.

Electric Gate Repair in Arvada
An electric gate that sticks, reverses, or stops halfway is usually telling you something – a misaligned sensor, a control board fault, a wiring problem, or a motor straining against a gate that’s no longer square. Because we work on electric gates every day, we go after the actual fault instead of guessing. That matters on the newer west-side properties, where a gate that won’t close cleanly can hold up the whole driveway. We handle operators from LiftMaster, FAAC, BFT and DoorKing as readily as residential units. Read more on our Electric Gate Repair in Arvada page.

Gate Installation in Arvada
Installing a gate in Arvada means accounting for two things at once: a lot full of mature trees and long driveway runs on the older side of town, and HOA architectural standards on the newer foothills side. A gate has to sit level on ground that wants to move, clear the driveway through a full season of heaving, and match what the neighborhood committee expects. That’s why we measure on site, talk through the style and material against your actual fence line, and put the whole plan in a written estimate before a single post goes in. If you’re starting from scratch, our Gate Installation overview explains what a full project involves from the first measurement to the final test swing.
Driveway Gate Installation
Signs you need it
You need a new driveway gate when the old one is too small for how you actually use the drive, the posts have heaved past saving, or you want to add access control for the first time.
What it costs in Arvada
Driveway gate installation in Arvada typically runs about $2,500 to $7,500, depending on gate size, material and whether an operator is part of the job.
How we do it
We lay out the opening, dig and set posts to proper footing depth in gravel-drained holes, mount the gate and hardware, then swing-test and adjust for a level, even closing.
Automatic Gate Installation
Signs you need it
An automatic gate makes sense when you’re tired of getting out to open a long driveway gate, or when a property needs controlled access for vehicles.
What it costs in Arvada
Automatic gate installation typically falls in the $3,500 to $9,000 range, with the operator, wiring and access control moving the number up or down.
How we do it
We match an operator to the gate’s weight and cycle, set the arm or slide mechanism, run the control wiring to a keypad or remote, and program and test every safety edge before we call it done.
What Gate Installation Costs in Arvada
| Item | Typical range in Arvada |
|---|---|
| Automatic gate installation | $3,500 – $9,000 |
| Driveway gate installation | $2,500 – $7,500 |
| Sliding gate installation | $2,800 – $8,000 |
How long does gate installation take in Arvada?
Most residential gate installations take a day to a few days once the gate and operator arrive, though custom fabrication and HOA approvals add lead time. We give you a realistic schedule in the written estimate.
Do I need a permit or HOA approval for a new gate in Arvada?
Many gate projects need a permit for the posts and footing, and west-side HOAs such as those in Candelas and Leyden Rock review style and color before anything is ordered. Ask the city’s building department and your association early.
Brands We Service in Arvada
We work on your brand, whether it’s Ghost Controls, Mighty Mule, DoorKing, Elite or the other major names. We don’t claim stocked parts or factory authorization – we diagnose the system in front of us and order what’s needed. Our technicians have up to 15 years of experience, and turnaround depends on the part. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Arvada, CO
| Service | Typical range in Arvada |
|---|---|
| Gate repair | $180 – $600 |
| Electric gate repair | $250 – $850 |
| Operator or control board replacement | $400 – $1,200 |
| Automatic gate installation | $3,500 – $9,000 |
| Driveway gate installation | $2,500 – $7,500 |
| Sliding gate installation | $2,800 – $8,000 |
On Arvada’s clay soils, the biggest driver of price is often the footing – a post that needs re-setting in deeper, gravel-drained ground costs more than a simple hinge adjustment. Custom materials and HOA-driven decorative styles also move the number. What doesn’t move: the price is quoted and agreed before any work starts, and the written estimate sets the final cost. Call (866) 389-4610 for a free estimate.
Neighborhoods We Serve in Arvada
We send technicians across Arvada, from the older streets near Olde Town to the foothills-edge subdivisions in the west. Whether you’re in a mid-century ranch or a newer build, the drive and diagnosis follow the same dispatch. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, so a gate that fails gets looked at quickly.
- Olde Town and the surrounding 80002 blocks
- Candelas
- Whisper Creek
- Leyden Rock
- Foothills-edge subdivisions in 80007
Service Area – Cities Near Arvada
Arvada sits on the western edge of the Denver metro, and our service area reaches the neighboring cities homeowners and property managers call about most. If you’re just outside Arvada, we can still help – check the page for your city or give us a call and we’ll confirm coverage. We handle gates in Westminster, CO, Thornton, CO, Lakewood, CO and Denver, CO, with the same single-trade focus on gates.
Serving Arvada, CO – Our Local Coverage Area
We serve Arvada and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Arvada
We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, so most Arvada calls get a same-day look when a gate has failed. Installation work is scheduled after the free measure and written estimate.
Yes. We work on residential driveway gates and higher-cycle systems for HOAs and commercial properties alike, from LiftMaster and FAAC to DoorKing. West-side associations with architectural-review requirements are a routine part of the job for us.
We cover Arvada’s ZIP codes, including 80005 and the older central blocks, plus the nearby cities listed above. If you’re unsure whether your address falls in range, call and we’ll confirm before scheduling.
Gate installation in Arvada comes down to getting the footing and the style right the first time, and a repair that lasts past the next freeze. For a free estimate on any gate project in Arvada, call (866) 389-4610. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Arvada Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Amit Shah"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Emily Whitaker"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Roger Sullivan