Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Centennial
If your driveway gate is dragging on the concrete, your ornamental iron gate won’t latch, or your operator has quit, you’ve landed in the right place. We repair manual and automated gates throughout Centennial, from the established subdivisions off Belleview Avenue and Orchard Road to the newer streets near Arapahoe Road, and we know how these gates are built, because we work on gate systems and nothing else. Every job starts with a free on-site estimate and a written price agreed before any work begins. To get a technician out to your property, call (866) 389-4610. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Centennial Homeowners Call Gate Repair Thornton for Gate Repair
Centennial’s gate work has its own character. The 80111 subdivisions were platted and built largely through the 1970s, 80s and 90s, so most driveway and side-yard gates here are original builder-era installations or first-owner upgrades now crossing their 25-30 year failure window. That means the hinge post and the concrete footing under it, not the panel, are usually the real project. We approach those gates with a repair-and-restore posture rather than a builder-grade swap, because on the higher-value properties around here the existing ornamental iron and custom fabricated hardware is worth keeping and correcting.
That focus shows in the calls we take. Homeowners, landlords and property managers in Centennial reach us because we diagnose the actual cause instead of selling a whole new gate. We work on manual and automatic systems, we’re licensed and insured, and our technicians have up to 15 years of experience. When you call, you get one point of contact from diagnosis through the completed repair. Free estimates, upfront pricing, and no surprise invoice at the end.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Driveway Gate Repair in Centennial
Driveway Gate Repair in Centennial usually starts with a gate that drags on the concrete by late winter, and the cause is almost always at the hinge post rather than the panel. In the established subdivisions here, the classic call is a swing gate that begins catching each March as Front Range freeze-thaw cycles heave the ground under a builder-era post footing. A proper repair resets or replaces that footing, re-plumbs the post, corrects sag, then readjusts the gate operator’s limits and confirms the safety photocell still trips. A typical driveway gate repair in Centennial runs $250-$650, with footing and post work at the higher end and hardware or alignment fixes at the lower end. Every price is written and agreed before we start.
Post and Footing Reset
When a hinge post has shifted, patching the hinge won’t hold through the next season. We reset or replace the footing to proper depth, re-plumb the post, and rehang the gate so the swing is true. That keeps a heavy panel running quietly instead of grinding along the drive.
Underground and Swing Operators
Many of the higher-value properties here hide the operator underground so the gate runs on clean lines. We service those systems along with standard swing operators, from the motor and control board to the limits and safety sensors. If the gate moves but won’t stop where it should, that’s usually an adjustment, not a replacement.
Gate Welding in Centennial
Gate Welding in Centennial is mostly about ornamental iron that’s been stressed by decades of sun, hail and freeze-thaw, and about restoring the original hardware rather than replacing it. Rusted hinges, cracked welds at the frame and stressed latch points are common on gates that have stood through 25-30 Colorado winters. We weld those joints back to solid, treat the rust, and refinish so the gate keeps its look and its alignment. A typical gate welding job in Centennial runs $150-$500 depending on how many joints need repair and whether the gate has to come off its hinges to work on it. The estimate is free and the price is set in writing before we begin.
Rust and Hinge Repair
Front Range dry air and intense UV fade finishes and stress hinges faster than in wetter, lower climates, so a hinge that looks fine can be seizing at the pin. We free it, repair or replace the hardware, and refinish so the gate swings without forcing the operator.
Weld and Frame Correction
A sagging ornamental gate traced to a cracked weld will re-fail within a season if only the panel is adjusted. We weld the frame true first, then realign the gate to the post. That’s the order that makes a repair last.
Trusted Brands We Service in Centennial
We work on your brand, whether it’s a residential-grade opener or a commercial high-cycle system. On Centennial properties we regularly service LiftMaster, FAAC, DoorKing, Elite, Ghost Controls and Mighty Mule, among others, and our technicians are certified to work on nine major gate brands. That depth means we diagnose and repair most systems without sending you elsewhere. We don’t stock parts on a truck or claim factory authorization, but we know these operators well enough to get to the fault quickly and get you back up and running. If your gate runs on a brand you don’t see named, call and describe it. Reach our gate repair team at (866) 389-4610 for a free estimate.
Common Gate Repair Problems We See in Centennial Homes
- Post heaving after winter. Freeze-thaw cycles lift the ground under original 1970s-90s footings, so swing panels drag on the driveway concrete by late winter. The fix is at the post, not the panel.
- Sag from a shifting hinge post. A gate that sags is often blamed on the panel, but a panel-only adjustment re-fails within a season when the post has moved. We diagnose the post first.
- Rusted iron hinges and stressed hardware. UV, hail and dry air age ornamental iron hardware faster here than in wetter climates. Seized hinges force the operator and wear it out early.
- Rotting wood privacy gates. Original wood side-yard gates from the 70s-90s rot at the base and lose alignment. We restore them in place rather than swapping to builder-grade.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Centennial, CO
Pricing here reflects the housing stock. A typical driveway gate repair in Centennial runs $250-$650, and gate welding runs $150-$500. Hinge and post repair on an established property lands around $300-$700 once a footing reset is involved, gate realignment runs $150-$400, and lock repair is usually $100-$250. What moves the number is the footing and post work, whether the gate has to come off its hinges, and how much refinishing the hardware needs. Higher-value properties with custom fabricated ornamental gates take more care, and we price that honestly rather than padding a swap you don’t need. Every estimate is free, and the written price sets the final cost before any work starts.
We Also Serve Cities Near Centennial
If you’re just outside Centennial, we can still help. We cover gate repair in Aurora, Denver, Ken Caryl and Lakewood, along with the surrounding metro area. Same specialist approach, same free written estimate, whether you’re a homeowner or managing a commercial or HOA property. Call (866) 389-4610 to schedule.
Serving Centennial, CO – Our Local Coverage Area
We serve Centennial and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Centennial
It’s almost always the gate, specifically the hinge post and its footing, not the operator. Freeze-thaw cycles heave the ground under builder-era footings, so the post shifts and the panel drags. Resetting the footing and re-plumbing the post fixes it. Call (866) 389-4610 for a free estimate.
Yes, in most cases it can. Sag usually traces to a shifted hinge post or a cracked weld, both of which we repair in place, then realign. On the established properties in 80111, restoring the original hardware makes more sense than a builder-grade swap. Call (866) 389-4610 and we’ll take a look.
A residential automatic gate should have entrapment protection such as photocells or a sensing edge that stops or reverses the gate when something is in its path. To check yours, walk the gate’s path while it closes and confirm it reverses; if it doesn’t, have a professional inspect the sensors and wiring. It’s a safety issue, so don’t leave it. Call (866) 389-4610 for an inspection.
If the motor runs but the gate stays put, the fault is usually in the drive, the limits or a mechanical disconnect, not the motor itself. On LiftMaster and FAAC systems we check the operator linkage, the control board and the limits to find it. Call (866) 389-4610 for a free estimate.
Rot at the base and warping come from the ground staying wet against the wood through freeze-thaw and snowmelt, combined with intense summer UV drying the surface. Original builder-era wood gates have had decades of it. We restore them in place rather than replacing. Call (866) 389-4610 to book an estimate.
Get Your Centennial Gate Working Again
Whether it’s a dragging driveway gate, a sagging iron gate or an operator that’s quit, we’ll diagnose it, give you a written price before any work starts, and restore what you have rather than sell you something you don’t need. Licensed and insured, with a satisfaction guarantee and free estimates. Call (866) 389-4610. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gate Repair Thornton.